THICK BED ADHESIVE
Fixcem 700
700 Crafit Fixcem is thin set & multipurrpose adhesive for laying using. the tacking or slurry technigue applied to a fresh coment-based screed a highly polymer modified one component adhesive designed for the installation of tiles and stones. This adhesive recommended for most heavy interior and heavy exterior residential usage as well as heavy interior and heavy exterior commercial uses.
- ONE PACK ADHESIVE
- HIGHLY POLYMER-MODIFIED
- EXCELLENT ADHESION TO SUBTRACT
- OPTIMUM WORKABILITY
- EASY TO USE
- CAN BE USED INDOORS AND OUTDOORS
- HIGH SHEAR BOND STRENGTH
- PROVEN PERFORMANCE
Characteristics :
- CURED CONCRETE
- MASONRY BLOCKS
- EXISTING BRICKS
- CEMENT PLASTER
- GYPSUM PLASTER
- CEMENT PLASTER
Recommended Substrates :
Coverage :
Approximately 80 sq.ft per 20 bag with 3mm*3mm square notch trowel for bed thickness of 1.5mm. Usage requirements are approximate. Coverage will depend on the trowel used and the condition of the subfloor.
| Size | Notch Trowel Size | Coverage Per Bag |
| 8" - 12" | 6mm X 6mm | 60sq.ft |
| 1" - Above | 3mm X 3mm | 80sq.ft |
| Coverage Approximately | ||
Tilecem 800
800 Tilecem is a specially formulated grey cement require the addition of aggregates and mixing with clean water, for the preparation of quick setting, shrinkage compensated mortars to be used as screeds and renders for interior and exterior applications. ceramic tiles/natural stone may b approximately after 24-48 hours, once the moisture content is 3%-5% or less. after 1 day, the compressive strength and flexural strength of Tilecem 800 screeds will exceed the level normally attained by conventional cement/sand screeds after 28days.
When la 60 is incorporated in the mix in the ratio of 5lt per 200kg dry sand/cement mix the set mortal will be water resistant and suitable for use in wet areas, eg showers, but will not be impervious to water
.
- GOOD OPEN TIME
- EXCELLENT BINDING PROPERTIES
- INTERNAL AND EXTERNAL
- EASY WORKABILITY
- GOOD COVERAGE
- ECONOMICAL
Characteristics :
- CURED CONCRETE
- MASONRY BLOCKS
- EXISTING BRICKS
Recommended Substrates :
| Tilecem 800 | Aggregates | Thickness | Coverage |
| 25 Kgs | 100 Kgs | 12 mm | 50 Sft |
| 25 Kgs | 125 Kgs | 25 mm | 30 Sft |
| 25 Kgs | 150 Kgs | 35 mm | 25 Sft |
| 25 Kgs | 175 Kgs | 50 mm | 20 Sft |
| Coverage Approximately | |||
Coverage :
Coverage will be based on following mix design. the grain size matrix has to be uniformly distributed up to a size of 8mm.we need approx 8-10 lts of water for an ideal mix. adjust th water content depenting on the site conditions
Fixscreed 900
900 Fixscreed is readily available material for tiling application it has carefully selected raw materials and factoy blended cement and fine guality graded sand in ratio of 1;4 for screed and plaster up 50mm. when LA60 is incorporated in the mix in the ratio of 5l per 40-kg, fixscreed will became water resistant and suitable for use in wet areas, eg showers, pools, bathroom and kitchen.
- GOOD OPEN TIME
- EXCELLENT BINDING PROPERTIES
- INTERNAL AND EXTERNAL
- EASY WORKABILITY
- CRACK-RESISTANCE
- GOOD COVERAGE
- ECONOMICAL
Characteristics :
- CURED CONCRETE
- MASONRY BLOCKS
- EXISTING BRICKS
Recommended Substrates :
Coverage :
Approximately 15 to 16 sqft. 40kg bag with trowel application for bed thickness of 15mm. Usage requirements are approximate.Coverage will depend on the trowel used and the condition of the subfloor.
